Robot lights on the plastic

A: Yuan Zhou at both ends of glue-type machines:
1: Technical parameters:
1, roller-type adjustable bracket width 100-430 mm (corresponding to all the specifications of your product or within a length of 430 mm products)
2, glue the first adjustable from 60-430 mm. Track-mounted, pneumatic lift height, height adjustable, center distance adjustment range from 25-100 mm
3, to accommodate the largest diameter: 250 mm
4, coating speed adjustable 0.5-5m per minute free-conditioning
5, drive power: AC220V 40W
6, digital setting circles
Second: configure:
1, rack for 4040 alloy production platform, the main support for the 45 # steel processing
2, hand wheel adjustment screw workpiece span, configuration engraved stainless steel scale
3, glue a few laps from the photoelectric encoder counter with the completion of
4, drive components for PU tire, 40W gear brake motor drive
5, stent coating around for the slide-type adjustment, pneumatic lift, handle screws
6, coating control conventional control circuit to control the components of all components used Nissan
7, pneumatic components for the Taiwan production, SMC Nissan products
B: b-axis running Zhou coating machine
1: Technical parameters:
1, glue tips 0-600 mm horizontal stroke, the speed of 10-350 mm / min adjustable
2, the maximum workpiece capacity of 350 mm in diameter
3, circumferential speed 5-35 circle / min adjustable
4, tip height adjustable 0-150 mm, 100 mm height amendment
5, drive power: AC220V 450W
Second: configure:
1,4040 steel processing rack side pass, 45 # steel processing table and the body
2, tip displacement for the M20 LAW rod with ball bearing slides and NSK processing element type, the overall allocation of 40150 mm cylinder, 25250 mm steel ball slide element type for the take-off and landing device driver configuration running about 86 mm sub - stepper motor drive, its parameters remain unchanged, to ensure that the reciprocating rotary coater track, gives a much greater speed of change and wide track to meet your product requirements.
3, the workpiece rotation of the gear teeth using 60W Motor Driver box, be free to adjust the speed of rotation, the rotation axis and the tip displacement of the electrical motor linkage, stop Kai smooth, easy adjustment.
4, glue pneumatic control unit configuration, and Taiwan producing cylinder, SMC solenoid valve, WTW speed brake motor, Nissan Omron Electronic Components, to ensure a high degree of reliability of the device.
C: hot melt adhesive machine configuration 26B Series
TANK Capacity: 10kg
pump power: 50K together planetary gear can be linked inverter speed control of plastic
Operating Temperature: Up to 230
the overall power consumption: 5200W
Power demand220VAC / single-phase
ability to melt glue: 22kg/hr
body weight: 48kg
body size: 680x350x630mm
Pressure Range: gun: 4.5kg
Hose length: / 4/4/8/Ft
Hose capacity: 2 Group / 4 Group
TANK deal with Teflon non-carbonation
D: hot melt adhesive tube 3 (2 4FT 1 Article 8FT)
1, import of Teflon liner tube, has good flexibility, and high temperature anti-sexual (up to 250 degrees), can greatly reduce the phenomenon of carbonization;
2, the heater heating the use of the United States and the high temperature line wire, evenly around the pipe wall, the insulation has a good and uniform thermal conductivity, high temperature performance:
3, the use of high-quality thermal insulation material to ensure that the insulation properties of these jets.
4, good bending performance, folding performance, based on the quality of the material (constant folding and high temperature heating wire line), and reasonable process design, its maximum bending radius of up to 20cm.
E-flow line gun group 3 sets
1, the reaction rate is sensitive and reliable.
2, built-in filters to reduce nozzle blockage caused by the fault.
3, Germany, the latest component sealing structure to ensure that the gun running stability, durability.
4, can be low-or high-speed intermittent and continuous spray work, this effect was strip spray gun.
5, spray specifications can be customized according to user needs.