Filters Daquan plastic machine

Parameters of transmission line coating technology
First, the technical parameters:
1, the length of 4000width 700 (820)height 750 (1100) mm.
2, power supply: AC220V, 400W.
3, transmission: 1.5m-15m glue adjustable speed (transfer coating independent regulator).
4, coating method: photoelectric sensor coating, empty head 5 mm.
5, control: Conventional control circuitry.
6, output count: six LCD monitors, power-down function to maintain.
Second, configure:
1, the main transmission line from 4060,4040 aluminum alloy profile processing.
2, 38, 80 galvanized wheel.
Green conveyor belt production 3,2.0 Netherlands 7006000 mm circumference.
4, stent coating for the 4040 square pass processing.
5, configuration 70700 mm PU wheel traction.
6, before and after the glue-driven photoelectric switches, control components all components for the Nissan.
7, chrome-plated platform.
8, transmission gear-driven motor for 90W, configure a dedicated governor.
9, coating production configuration Taiwan VVVF motor 4/1HP gear.
TANK host parameter 10.26B capacity: 10kg
pump power: 50K together planetary gear can be linked inverter speed control of plastic
Operating Temperature: Up to 210
the overall power consumption: 5200W
Power demand220VAC / single-phase
ability to melt glue: 22kg/hr
body weight: 48kg
body size: 680x350x630mm
Pressure Range: gun: 4.5kg
Hose length: 2/4/6/8/10/24Ft
Hose capacity: 2 / 5 Group
TANK deal with Teflon non-carbonation
11. Hot melt adhesive tube:
imported the Teflon liner tube, has good flexibility, and high temperature anti-sexual (up to 250 degrees), can greatly reduce the phenomenon of carbonization;, American heating heater wire and high temperature lines, evenly around the pipe wall, the insulation has a good and uniform thermal conductivity, high temperature performance:, the use of high-quality thermal insulation material to ensure that the insulation properties of these jets.
, good bending performance, folding performance, based on the quality of the material (constant folding and high temperature heating wire line), and reasonable process design, its maximum bending radius of up to 20cm.
, length and other related parameters of customer demand can be manufactured
12. Gun blade
, active gas shells open Guan Huang Guancong design, the reaction rate is sensitive and reliable.
, built-in filters can be coated to reduce the congestion caused by the fault mouth.
, mouth imported wear resistant coating material, with a special process to durable, long-term use will not wear.
, Germany sealed structural elements of the latest to ensure that the gun running stability, durability.
, to carry out low-or high-speed intermittent and continuous spray work, can even be painted the plastic coating material, this effect was massive glue gun.
, glue the width of 1mm-18mm, can basically meet the needs of all existing coating.
, can be modified according to user requirements applies to all of the world's brand hot melt adhesive machine.
Indentation roller machine
First, parameters:
1, the size of the length of 1500 mm width 850 mm 600 mm high.
2, embossing speed :2.5-20m / min adjustable.
3, drive power: AC220V, 200W.
Three configurations:
1, knife round indentation: 85350 mm, 40r processing, carburizing treatment (can not adjust line pressure marks).
2, chrome tailgate position for regulating the location of paper cards.
3,1.2 mm stainless steel plate processing release slot, size, depending on the size of the paper cards, depth 120 mm.
4, gear drive motor configured to 200W, configure a dedicated governor.
5, platform chrome handle, rack for 4040 square pass processing, spraying the whole deal.